ED Video Lecture

By /

Module 1 - Introduction to Engineering Drawing

Lecture 1: Introduction to Engineering Drawing

Lecture 2: Introduction to Engineering Drawing Instruments

Lecture 3: Types of Lines and Dimension styles

Lecture 4: Letter writing style

Lecture 5: Writing of Letters and Numbers

Lecture 6: Geometrical Constructions

Module 2 - Engineering Scales

Lecture 7: Introduction to Engineering Scales and Construction of Plain Scale

Lecture 8: Introduction to Engineering Scales

Lecture 9: Construction of Plain Scales

Lecture 10: Construction of Diagonal Scale

Lecture 11: Construction of Comparative Scale

Lecture 12: Construction of Vernier Scale and Scale of Chords

Module 3 - Engineering Curves

Lecture 13: Introduction of Engineering Curves and Classifications

Lecture 14: Construction of Conical Curves using General Method

Lecture 15: Construction of Ellipse using Special methods

Lecture 16: Construction of Parabola, Hyperbola and Normal Tangent

Lecture 17: Construction of Involute and cycloidal Curves

Lecture 18: Construction of Epicycloid and Hypocycloid

Lecture 19: Construction of Spiral Curves (Logarithmic Spiral)

Lecture 20: Construction of Spiral Curves (Archimedian Spiral)

Lecture 21: Tangent and Normal to Archimedian Spiral

Module 4 - Orthographic Projections

Lecture 22: Introduction to Orthographic Projections

Lecture 23: Orthographic Projections - Problems Solving

Module 5 - Orthographic Projection of Points and Lines

Lecture 24: Introduction to Projection of Points

Lecture 25: Introduction to Projection of Straight Lines

Lecture 26: Projection of Straight Lines part 2

Lecture 27: Projection of Straight Lines part 3

Lecture 28: Projection of Straight Lines part 4

Lecture 29: Projection of Straight Lines part 5

Lecture 30: Projection of Straight Lines (Line Inclined to Reference Planes)

Lecture 31: Projection of Straight Lines (Inclined to both planes)

Module 6 - Projections of Planes

Lecture 32: Introduction to Projection of Planes

Lecture 33: Projection of Planes Part 2

Lecture 34: Projection of Planes Part 3

Module 7- Projection of Solids

Lecture 35: Introduction to projection of solids part 1

Lecture 36: Introduction to projection of solids part 2

Module 8 - Section of Solids

Lecture 37: Introduction to section of Solids

Lecture 38: Section of Solids Part 2

Lecture 39: Section of Solids Part 3

Lecture 40: Section of Solids Part 4

Module 9 - Development of Solids/Lateral Surface of Solids

Lecture 41: Introduction to Development of Solids

Lecture 42: Development of Lateral Surface of Solids

Lecture 43: Development of Prism and Pyramid

Lecture 44: Development of Cylinder

Lecture 45: Development of Frustrum of Pyramid

Lecture 46: Development of Cone part 1

Lecture 47: Development of Cone part 2

Lecture 48: Section and Development doubt Session

Module 10 - Isometric Projections

Lecture 49: Introduction to Isometric Projection Part 1

Lecture 50: Introduction to Isometric Projection Part 2

Lecture 51: Introduction to Isometric Projection Part 3

Module 11 - Interpenetration of Solids

Lecture 52: Interpenetration of Solids or Intersection of Surfaces

Scroll to Top