CAMDD-Video-Lecture

By /

Module 1 - Introduction to Machine Design and Classifications

Lecture 1: Introduction to Machine Design

Lecture 2: Introduction to Engineering Materials [Ferrous Metals]

Lecture 3: Introduction to Engineering Materials [Non-Ferrous Metals]

Lecture 4: Introduction to Engineering Materials [Non-Metals]

Lecture 5: Introduction to Engineering Material Properties

Lecture 6: Introduction to Stresses in Machine Members

Lecture 7: Factor of Safety and introduction to Cotter Joint

Module 2 - Design of Cotter and Knuckle Joint

Lecture 8: Design of Spigot and Socket Cotter Joint

Lecture 9: Design of Spigot and Socket Cotter Joint Problems

Lecture 10: Design of Knuckle Joint

Module 3 - Design of Riveted Joint

Lecture 11: Introduction to Riveted Joint

Lecture 12: Design of Riveted Joint Part 1

Lecture 13: Design of Riveted Joint Part 2 (Boiler Joint)

Lecture 14: Design of Riveted Joint Part 3 (Eccentric Loading)

Module 4 - Welded Joint Design

Lecture 15: Introduction to Welded Joint

Lecture 16: Design of Welded Joint Part 1

Lecture 17: Design of Welded Joint Part 2

Module 5 - Design of Screw Fasteners

Lecture 18: Introduction to Screw Threads

Lecture 19: Introduction to Bolts and Studs

Lecture 20: Design of Bolted Joints Direct Loading

Lecture 21: Design of Bolted joint Eccentric Loading

Lecture 22: Design of Bolted joints Eccentric Loading

Module 6 - Shaft Design

Lecture 23: Design of Shaft Part 1

Lecture 24: Design of Shaft Problems Part 1

Lecture 25: Design of Shaft Problems Part 2

Module 7 - Couplings Design

Lecture 26: Design of Sleeve or Muff Coupling

Lecture 27: Design of Split Muff Coupling

Lecture 28: Design of Flange Couplings

Lecture 29: Design of Flexible Couplings

Module 8 - Assembly Drawing

Lecture 30: Introduction to Assembly Drawing and types

Lecture 31: Orthographic Drawing of Nut and Bolt in AutoCAD

Module 9 - Limit Fits and Tolerances

Lecture 32: Introduction to Geometrical Tolerances

Lecture 33: Geometrical Tolerances Applications

Lecture 34: Dimensional Tolerances (Limit Fits and Tolerances)

Lecture 35: Limit Fits and Tolerances Problems

Lecture 36: Surface Roughness

Lecture 37: Preferred Series Numbers

Scroll to Top