Module 1 – Lecture 1: Introduction to Engineering Drawing
In this lecture, a brief introduction of engineering drawing is discussed along with syllabus, instruments etc.
0/1
Module 1 – Lecture 2: Types of Lines and Dimension styles
0/1
Module 1 – Lecture 3: Letter writing style
0/1
Module 2 – Lecture 1 : Introduction to Engineering Scales and Construction of Plain Scale
0/1
Module 2 – Lecture 2: Construction of Diagonal Scale
0/1
Module 2 – Lecture 3: Construction of Comparative Scale
0/1
Module 2 – Lecture 4: Construction of Vernier Scale and Scale of Chords
0/1
Module 3 – Lecture 1: Introduction of Engineering Curves and Classifications
0/1
Module 3 – Lecture 2: Construction of Conical Curves using General Method
0/1
Module 3 – Lecture 3: Construction of Ellipse using Special methods
0/1
Module 3 – Lecture 4: Construction of Parabola, Hyperbola and Normal Tangent
0/1
Module 3 – Lecture 5: Construction of Involute and cycloidal Curves
0/1
Module 3 – Lecture 6: Construction of Epicycloid and Hypocycloid
0/1
Module 3 – Lecture 7: Construction of Spiral Curves (Logarithmic Spiral)
0/1
Module 3 – Lecture 8: Construction of Spiral Curves (Archimedian Spiral)
0/1
Module 3 – Lecture 9: Tangent and Normal to Archimedian Spiral
0/1
Module 4 – Lecture 1: Introduction to Orthographic Projections
0/1
Module 5 – Lecture 2: Orthographic Projections – Problems Solving
0/1
Module 6 – Lecture 1: Introduction to Projection of Points
0/1
Module 6 – Lecture 2: Projection of Straight Lines
0/1
Module 6 – Lecture 3: Projection of Straight Lines part 2
0/1
Module 6 – Lecture 4: Projection of Straight Lines part 3
0/1
Module 6 – Lecture 5: Projection of Straight Lines Part 4
0/1
Module 6 – Lecture 6: Projection of Straight Lines part 5
0/1